Above is a CPM 101T
|
Specifications |
||
| 101T | 560 | |
| Screen Area | 3987 - a number of perforations available | 1908 - a number of perforations available |
| Capacity | 100 tons per hr through 1/2" screen based on 40lbs./cu.ft. | 60 tons per hr through 1/2" screen based on 40lbs./cu.ft. |
| Motor Requirements | 25 - 33.5HP | 15 - 20HP |
| Feed screw conveys the meal from the inlet hopper to the cleaning section where epoxy wipers sweep the inner surface of the perforated screen. The dressed product passes through the screen while particles larger than the perforations are discharged at the outer end. | ||
Below is a CPM 560
